18-5181 - Ignition Coil, 584477
|
 |
List Price
$28.99
Your Price
$26.91
You save $2.08
10+ In Stock. SPEEDY DELIVERY
30-DAY RETURN
FULL WARRANTY
Part Number
18-5181
Manufacturer
Sierra Marine
Replaces OEM 0584477.
18-5181 Ignition Coil Replaces: OMC 582995, 584477 Mercury 802371A1
IMPORTANT INSTALLATION NOTICE:
After installing this coil, the armature plate should be rotated over its full range of travel to insure that it turns freely when the motor is running. If any interference is observed the two coil mounting screws should be checked to see if they are contacting the top of the cylinder and the crankcase. If they are, remove the two coil mounting screws and grind or file the end of each screw to eliminate any interference. After shortening the screws, each tip should be ground to a slight point to facilitate reassembly of the coil. To keep the existing threads free of metal particles during grinding or filing, attach a 10-24 nut to the screw prior to grinding. After the modification is completed, remove the nut from the screw and reassemble the coil.
Sierra Marine 18-5181 - Ignition Coil, 584477 is equivalent to parts:
- 18-5181D Sierra Marine
- 584477 Evinrude Johnson OMC BRP
- 802371A1 Mercury Marine
- 802371A 1 Mercury Marine
- 9-23102 Mallory Marine
Sierra Marine is the market leader for aftermarket marine engine parts. Sierra products cover every major engine brand. Sierra offers a comprehensive product line and an unsurpassed customer satisfaction warranty covering parts and labor.
Replaces OEM 0584477.18-5181 Ignition Coil Replaces: OMC 582995, 584477 Mercury 802371A1 IMPORTANT INSTALLATION NOTICE: After installing this coil, the armature plate should be rotated over its full range of travel to insure that it turns freely when the motor is running. If any interference is observed the two coil mounting screws should be checked to see if they are contacting the top of the cylinder and the crankcase. If they are, remove the two coil mounting screws and grind or file the end of each screw to eliminate any interference. After shortening the screws, each tip should be ground to a slight point to facilitate reassembly of the coil. To keep the existing threads free of metal particles during grinding or filing, attach a 10-24 nut to the screw prior to grinding. After the modification is completed, remove the nut from the screw and reassemble the coil.
26.91
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.