Logo
FULL SITE MENU

kghost's latest activity

  • kghost
    kghost replied to the thread Mercruiser Alpha One 5.7 Litre Distributor Cap Question.
    Here is a link on this web site for your serial number. https://www.marineengine.com/parts/mercury_marine_parts/sn/0L660961 Based on...
  • kghost
    kghost replied to the thread 4.3 Mercruiser - randomly dies.
    No, I made a small T handle about 2" long with the same end as the one in the picture. No need for additional attaching tools. Small and...
  • kghost
    kghost replied to the thread 4.3 Mercruiser - randomly dies.
    Hahaha Ya then Everyone would have one... I may give it some thought. In the mean time I am able to breeze through winged plug...
  • kghost
    kghost replied to the thread 4.3 Mercruiser - randomly dies.
    Yes, Made two, One for my boat and one for toll box for others boats/batteries Also made one 2 1/2" long to remove winged block and...
  • kghost
    kghost replied to the thread 4.3 Mercruiser - randomly dies.
    Enough on the Wing nuts on batteries..................They work perfectly when you have the right tool.
    • 20260617_025028.png
  • kghost
    kghost replied to the thread Water in Oil.
    If you can get/borrow a smoke machine, get the smoke into the same t stat port the incoming water hose connects to, of course remove...
  • kghost
    kghost replied to the thread Mercruiser Alpha One 5.7 Litre Distributor Cap Question.
    need more info on engine........................Serial number, EFI, TBI, or carbed. Different configurations used different ignitions...
  • kghost
    kghost replied to the thread Mercruiser Wire Harness Help.
    disregard, coffee hadn't kicked in yet
  • kghost
    kghost replied to the thread Mercruiser Wire Harness Help.
    See schematics, May not be your exact schematics but they show what you ask about
    • Old dash.jpg
    • old 351.jpg
  • kghost
    kghost replied to the thread Mercruiser Wire Harness Help.
    One socket is Unused on the dash to engine connector. Thus the 10 socket vs 9 pin.
  • kghost
    kghost replied to the thread 75 Formula Shift Issue.
    """""Three, some how the terminal block was grounding itself out through the shift plate. Not sure how this was happening as one side of...
  • kghost
    kghost replied to the thread Water in Oil.
    Oooooops, anither important detail left out. the info on hard starting and rough running as mentioned is not good especially when water...
  • kghost
    kghost replied to the thread Water in Oil.
    What is your understanding of WET JOINT? I think you mean what was standard for the last 40+ years. The newer I believe is called Dry...
  • kghost
    kghost replied to the thread Water in Oil.
    Take a step back. Your first post lacked a ton of information. Thus many posts asking the questions you should have presented in your...
  • kghost
    kghost replied to the thread 75 Formula Shift Issue.
    Spoke on the phone. His switch is an original from his vintage of boat, it is a single layer arm. Newer versions became two layer as in...
Show older items
Back
Top