Logo
FULL SITE MENU

Recent content by kite2

  1. K

    Gear shimming

    Yes I have a download copy but my printer is shot so I've been viewing it on my phone. It challenging so im going to buy a new printer to make it easier to read. Thank you for your help.
  2. K

    Gear shimming

    Thank you for the feedback. Hopefully i can get this one done and learned a lot do so.
  3. K

    Gear shimming

    I received the new tool part number 854377 and it definitely fits better. I have oem number 853040 gearset with 24 teeth on each gear that is coming up as letter "B" for measurements. The original shims are in and I'm getting over 0.100 measurement which would be about 0.075 shims plus the...
  4. K

    Gear shimming

    Thank you
  5. K

    Gear shimming

    I have serial number 0L225844 and 2.00R on the upper drive housing. Thank you for the other tool numbers ,I'll check to see if that's what I need.
  6. K

    Gear shimming

    I have a 1998 searay 3.0 engine alpha 1gen 2 outdrive 2:1 ratio and im trying to set the driven gear in the upper housing . Im using tool 91-60526 in hole position "Y" aiming for .025 and it's way off. I probably have 1/4 inch gap. The other thing that's odd is the manual shows the tool...
See more
Back
Top