Logo
FULL SITE MENU

Recent content by Newtomotortinkering

  1. N

    Cam follower roller thingy

    I am assuming that is the part number?
  2. N

    Cam follower roller thingy

    I just took a bunch off of the roller, and the roller itself looks fine, although smaller, so I am thinking that there should be a "tire" on the white nylon roller, thinking that I can make one to slip and glue into place with a feul line or hose tubing , thoughts?
  3. N

    Cam follower roller thingy

    no, this is a 1975 Johnson, I also have 2 Chryslers, a 1976 10hp, and a 1979 6hp, and an Evinrude 18, 1972. I am starting with the one I think I can get into the water first, then work on learning what the other 3 motors will need to go. I am trying to gather parts for the 72 evinrude 18, such...
  4. N

    Cam follower roller thingy

    Great, what are they called? I am calling it a cam follower, not sure if that is right though
  5. N

    Cam follower roller thingy

    yes for the 75
  6. N

    Starter rewind bolt issues

    ok, thanks for the input
  7. N

    Cam follower roller thingy

    I need a replacement roller thing that follows the cam as you increase speed, any ideas?
  8. N

    Starter rewind bolt issues

    I just got a 1975 15hp Johnson, model # 15R75C, with a broken rope, real cheep. I got into it and need to replace some parts, no surprise there. I was inspecting the main bolt and it seems to be canted a bit to the rear, and the threads look like they were crossed, so, the question I have is...
  9. N

    1976 10 hp and 1979 6 hp Chryslers need electrical parts, to start with

    thank you both for the advice, I will try all options before I spend money, I am in Iowa, USA
  10. N

    1976 10 hp and 1979 6 hp Chryslers need electrical parts, to start with

    thank you
  11. N

    Converting to electric start

    I may be interested in a bracket for an 18hp 1972 evinrude,
  12. N

    1976 10 hp and 1979 6 hp Chryslers need electrical parts, to start with

    i have a couple of Chrysler motors, I checked the compression, both are great, I checked to spark, and both of them seem to be firing on one cylinder and not the other. So, I was planning to change out points, plugs, condensers, and even the coils to be sure they are good to go. Where and what...
See more
Back
Top