Logo
FULL SITE MENU

Recent content by SaltTime

  1. S

    2011 Honda (BF40D50) 50 HP outboard telltale issues

    Make sure you put some sort of hose clamp on every one of those connections because if that hose slips off during operation I believe there’s stories of peoples cowlings filling up with water and when it reaches the intake very bad things happen.
  2. S

    BF50D "Rpm issue"

    Got some time today and resistance checked the throttle body and had a smooth sweep from zero to wide open throttle and back again…also voltage tested it with key on and with the throttle linkage still attached using binnacle I got .60v at zero and rode the voltage up slowly to 4.54 and back a...
  3. S

    BF50D "Rpm issue"

    thank you iang, I googled that type of tach and it’s it looks like that is a bit out of my price range, and I don’t have that dva meter adapter thing. If I’m able to find something tomorrow I will update. Thanks again fellas
  4. S

    BF50D "Rpm issue"

  5. S

    BF50D "Rpm issue"

    I can get the boat cruising on top and, like you say I start to trim the motor out and at about 4200-4300 according to the current tachometer it starts clipping out and won’t accelerate anymore. I can reduce throttle and it will be fine until I increase trim or throttle, then it starts to do it...
  6. S

    Throttle Position Sensor replacement

    gotcha, going to retest tomorrow and report back.
  7. S

    Throttle Position Sensor replacement

    ok, I did test it through the range the other day and it was kind of erratic…when I would go to full throttle it would go up to about 4.2v and then bleed down slowly to about 3.9v after about 5-6 seconds… I will revisit that tomorrow and see what I can find. Thanks for the response
  8. S

    Early 2000s bf50 tiller

    Heck yea, nice work. Feels good when a project comes together.
  9. S

    BF50D "Rpm issue"

    hmmm interesting, I installed this tachometer Sierra International 58255P Tach 7K I have it set to the 3p/6c as it seemed to have the closest normal idle speed. Is it possible this tachometer is not compatible with my engine? Have you ever heard of that happening? Here’s a pic of the back...
  10. S

    Throttle Position Sensor replacement

    I’m having the same issue as you…..were you seeing any MIL lights or codes? Reason I ask is because I don’t have any codes yet I have that problem. Thanks
  11. S

    BF20D Flame Trap issue

    I wonder how a bead of np1 sealant or equivalent would work
  12. S

    BF20D Flame Trap issue

    Can you post a picture
  13. S

    BF50D "Rpm issue"

    pretty sure I have my tach set correctly as the idle speed is about 900, I suspect there’s another issue because the motor just doesn’t get to that “scream” sound and feel. Thanks for the suggestions though, I will update if I find a fix. If anyone has any experience checking coils and reads...
  14. S

    BF50D "Rpm issue"

    Yes, it has the original aluminum Honda prop whicg had slight wear but nothing bad. I’ve also tried a smaller diameter prop and at the exact rpm it starts to clip out. I would think the problem rpm range would change but it doesn’t, just gets to the problem area faster with less throttle at a...
  15. S

    BF50D "Rpm issue"

    forgot to mention, my MIL light stays unlit while underway and I don’t show any codes upon jumping the DTC plug.
See more
Back
Top