Logo
FULL SITE MENU

Anyone near Mt. Pleasant Mi that can assist me with my ‘57 Evinrude fastwin 18 ?

3

333Fitter

Contributing Member
It has new points,condenser’s, coils & wires
I had it running last year not great but running.
It was my dads so it’s important to me to git running.
Im willing to drive if necessary?
 
Post an ad on the ----aomci-----site.------Likely a grey haired type in your area that can help you.----I am too far away.
 
I tried logging in several times to no avail
Incorrect password so i make a new one it accepts it still doesn’t work aaarrrggghh
 
Also get a spark tester and make sure you have a strong spark,jump 3/8" with a blue spark and a real snap. The inspection cover is sweet because if you use a timing light you can adjust the points to open sooner or later without pulling the flywheel. You can get them firing at the PERFECT time. You really should do this yourself as its not that difficult. I did my dads/grandpas motor about 20 years ago, 1956 . I learned a real love for these old motors and a connection to my family's past. I use it with my kids.
 
Back
Top