Logo
FULL SITE MENU

Search results

  1. T

    oil injection

    I would like to know if anyone here has the onboard oil tank, and the remote tank of a 1998 150XR6. The previous owner removed all of this, but left the oil pump and I would like to check the oiler for proper operation, so that I can put it back the way it was. Mixing gas and oil is a pain in...
  2. T

    Question for Graham

    On a Mercury 150 XR6, it will idle perfect in nuetral, and runs like a top from just above idle to wot, but will not idle in gear. I replaced the plugs, and the shift cables, and the shift controls. I am thinking the carbs might be stopped up, but I don't have a lot of money and rebuild kits...
  3. T

    Graham or Jeff 1998 150 hp xr6

    I have a 1998 150 XR6, replaced the impeller and the water pressure gauge. When on the hose the pressure was good, but when I went to the lake at idle the pressure wasn't reading, and at wot it only showed 10 psi. Any ideas on what could be causing this. Has a good stream from the tell tale...
  4. T

    Temp gauge 1998 150 hp xr6

    "I have a mercury 150 XR6 1998 and I would like to put a temp gauge on it and was wondering if anybody knows if this is possible? I know that I have the warning buzzer and a water pressure gauge, but I would like to have the temp also. Thanks in advance for any information."
  5. T

    PLEASE HELP 1998 150 hp XR6

    I have tried to adjust the shift cables on a 1998 150XR6 and I am not having any luck. The neutral sensor is not lining up and I have to play with the shifter to start the motor. Can anyone tell me the correct way to make the adjustment? Thanks in advance for any and all help.
  6. T

    Shift cable adjustment 1998 150 hp XR6

    What is the proper way to adjust the shift cables on a 1998 150XR6?
  7. T

    Jackplate for a 150 XR6

    I have a mercury 150XR6 on a T I have a mercury 150XR6 on a Triton TR19. What size jackplate do I need?
  8. T

    Trolling motor wiring

    I just bought this boat and th I just bought this boat and the trolling motor wiring doesn't look right. It is a 24 volt system but it has 2 red and 2 black wires running from the batteries up to the motor and they both connect at the plug but on different terminals of the 4 prong plug. All...
  9. T

    1998 Mercury 150 hp XR6

    My 150 XR6 turns over very slow and the starter gear sticks. I have replaced the battery. And I was wondering if there is supposed to be a shim between the starter and the block
Back
Top