Logo
FULL SITE MENU

Search results

  1. M

    Alpha one gen 2 tapping at hard turning angle

    Good morning we own a 2006 Bryant 190 with the Mercruiser 4.3 TKS. Had to have a new upper and lower unit installed two years ago so went with an SEI it’s been great . We’ve had no issues, I did the initial gear oil break-in, and then fluid changes every year. I’ve noticed this year that if I am...
  2. M

    Winterizing 4.3

    Hey all. I winterized out ski boat today, first time doing this. I pulled the 5 blue drain plugs and let everything drain I then undid the hoses at thermostat and poured antifreeze down all the hoses till it was running out of block and manifolds on both sides, also was running out on the ground...
  3. M

    4.3 prop

    Hey guys, So we had to get a new alpha one drive due to the theft of our other one. It’s a 1.62. It had a vengeance 19 p prop on it so I decided to try a 4 blade rev 4. Bought a 19 pitch per merc prop finder. Boat runs great but can’t get past 4200. That’s at 45 mph. Do I need to go down to a...
  4. M

    Alpha one gen 2 upper driveshaft seal

    Hey guys, I’ve got an Alpha one GEN two on a 2006 Bryant 190 but the outdrive is actually a 2016 it was replaced according to the service records that came with the boat, the serial number on the drive, there are two different barcodes one is a 5121300TS, the other is not completely legible It...
  5. M

    Mercruiser 4.3 port elbow hot

    Hey all ! New member here. Long time boat owner, new to I/O boats always had outboards. We bought a 2006 Bryant 190 with the mercruiser 4.3 with 240hrs. Has an Alpha one gen 2. Really clean boat that’s been kept inside. The motor runs great, me and my son changed the oil and the fuel filter...
Back
Top