Logo
FULL SITE MENU

Search results

  1. H

    35hp Evinrude - no model/serial tag

    It looks like it is a Nissan from what I am finding. Still haven't identified exactly what it is, but I have seen some similarities on Nissan motors made by Tohatsu. Thanks all. I'll keep digging.
  2. H

    35hp Evinrude - no model/serial tag

    Took me a bit to figure it out. But images now posted. Thank you.
  3. H

    35hp Evinrude - no model/serial tag

  4. H

    35hp Evinrude - no model/serial tag

    There are these numbers on a tag on the block 2WT68D
  5. H

    35hp Evinrude - no model/serial tag

    Hey all - I picked up this motor pretty cheap to tinker with. Good compression. No spark. There is no model/serial tag on it. I am guessing it is a 70s 35hp tiller. I have posted some pics. Can anyone identify it so I can start researching for parts? Please and thank you all! Well…phone...
  6. H

    1977 Mercury 150 hp 1500 Trim/Switch

    Hi all -- Thank you for your help. I have put in a new trim/tilt pump which works fine with the original switch at the front of my bass boat (Occasionally this switch only goes down and not up), but the switch on the controls does not work at all. I am having a hard time finding the part # for...
  7. H

    Late 70s 20 HP Merc Tiller Lower Unit issues

    Hi all -- I bought a 20 hp mercury pretty cheap. It's a late 70s model. It won't go into gear. I can shift it and it looks like it just pushes the prop out a little bit and never engages. There is movement in and out on the prop. So, I took the prop off and the prop shaft moves in and out...
  8. H

    15hp Johnson -- 2007? 2009?

    Hi all -- I just bought a 15hp Johnson and I was told it was a 2009, but the serial tag has fallen off. I noticed that in the boat/engine parts on this website there is no 15hp Johnson outboard listed under 2009. A different sticker says that is passes all 2007 EPA standards. Does that mean...
  9. H

    1990 Yamaha Stern Drive Tilt Trim Hose removal Help!

    Hi All -- I bought a boat last night. I came home from work today and the prop was down to the ground. Tilt Trim fluid had leaked out of a pin hole all over the ground. I have the arms off and have the hose off the arm, but I can't get my wrench in to loosen the bolts where they connect near...
  10. H

    Gamefisher Throttle Will Spin All the Way Around in Neutral

    Hi all, I have a 15hp gamefisher. I think mid 90s. When it's in neutral, I can spin the throttle all the way around. It won't rev up in neutral and then the throttle will go around and click, and then click again, until I've gone back to start. Once it's in forward it doesn't do that, and...
  11. H

    Mercury Classic Fifty Outboard 45 Year???

    Hi all -- I have a Mercury Classic Fifty that seems to have the serial # plate missing off of the transom mount. Is there any way to tell the year of the motor? Any differences in these that I could check out? Thanks!
  12. H

    New used 45hp Classic Fifty Merc, late 80's won't spark

    Hi All, I just bought a "Classic Fifty" Merc from the Late 80s. Compression is good on 3 cylinders, can't get to the bottom cylinder to check it. I hooked it up to a battery and fuel and it just cranks. No spark. It has not been ran in several years. What order would you go about knocking...
  13. H

    Just bought this 70s 25 Johnson -- Any help is appreciated!

    Hi all -- Always appreciate your help. I just bought this motor. It starts, then it seems to die, and wait a little while and it will start again. The former owner said he thinks that it's flooding itself. Any ideas on places to start checking things out...
  14. H

    1970 or 1971 Mercury 200 20 hp outboard Impeller Check

    Hi All -- I have a Kiekhafter 200 20 hp 1970 or 71, Mercury Outboard. Will you watch this video and see how much water is spitting out when it's on low idle, and then when it speeds up and see if you think that's normal. https://www.youtube.com/watch?v=WthCJpkmdwU Also -- How can I drop the...
  15. H

    Year? Mercury Outboard

    I have a 200 20 H.P. Mercury Outboard, SErial # 2888562. Any ideas on the year?
  16. H

    Looking to purchase this 20 hp mercury outboard tomorrow -- any thoughts?

    Hi all -- I am headed to pickup this motor tomorrow w/ tank and line for $150. Here's the issues as described to me so far. Can you give me some leads as to what to look at when I go to see about purchasing it? And what I might need to fix when I get it home? Is there any major red flag that...
  17. H

    50ESLB Johnson 50hp 1975 -- Engine dies when hood is on.

    Hi all -- Thank you in advance for your help. I just had my outboard serviced. 1975 Johnson 50HP, 50ESLB. He had it running great when the hood was off, but when he put the hood on the engine would die. He said it was because of an exhaust O-ring that is not made anymore causing dirty air to...
  18. H

    Water pump changed but still not pumping

    Hi all, I changed a water pump today on a 9.8 mercury from the mid 70s. I ran the motor for about 1 minute and it hadn't started pumping water yet in a barrel of water, before I had to shut it down b/c I had to leave. A couple questions. 1. Should it have reached temp by then? 2. It didn't...
  19. H

    1975 Johnson Outboard Fuel Leak

    Hi all -- I had a hose off of the 2 nipples below the carburetor that was leaking fuel. I put that hose back on, but now I see a drip on the side of the top carburetor. Is it leaking through the gasket? It's right on the side of the carb. Thanks! Josh
  20. H

    9.8 merc overheating

    I have a Mercury 9.8 outboard. It says serial # 3267213, but I can't find it on the serial # locator and I can't find any diagrams for it. I'm assuming I need to take a look at the water pumps in it, but I can't find any part #'s b/c I can't find a schematic for it? Help! :) Thank you! Josh
Back
Top