Logo
FULL SITE MENU

Search results

  1. W

    no start after rebuild (x2)

    All, Had both engines rebuild last winter. re-builder found heads no longer serviceable. Replaced all four. We managed to install and plumb both engines last spring but could not test and do final setup, engines started briefly to winterize. Mechanic swears they ran, not well but fired up. Fast...
  2. W

    age old carb debate sorry guys

    Hello all: carb choices for aging chrysler 360's I know this has been asked and answered several times. I'm frustrated with my current 360's and the quadrajets, I've rebuilt them and I'm still getting poor results, erratic idle, some days rich some days lean. Just cant get both engines to run...
  3. W

    age old carb debate sorry guys

    Hello all: carb choices for aging chrysler 360's I know this has been asked and answered several times. I'm frustrated with my current 360's and the quadrajets, I've rebuilt them and I'm still getting poor results, erratic idle, some days rich some days lean. Just cant get both engines to run...
  4. W

    Still having belt issues

    Hello guys, seems these old 360's as much as i love em' require the attention of an infant. Alternator belts still squealing, I've tightened, I've adjusted, I've inspected. I've changed belts. Quiet for a bit then bam- screaming like a murder victim. Noticing a black powdery soot all around...
  5. W

    coolant loss

    Sirs: Strange thing on the spring commissioning. dumped her in and started her up, no issues. Forgot to check the coolant level and she was low, very low. added what I had on hand and she was still low. topped up with water. shes currently still full after running it a bit. No apparent...
  6. W

    fixed systems and fuel eco is falling

    Ok- oil leak- fixed- oil filter adapter was leaking.gasket set $19 fix changed- plugs-distributor-wires-rotors-coils- ( call it a tune up). PCV valve on port engine never connected to vacuum as the starboard was. Fixed- base plate from donor carb with proper fitting used. So- engines are...
  7. W

    difference between the Qjet on a crusader 350 and the Qjet on a chrysler 360

    Hey guys, just became the owner of a pair of carbs from a pair of crusader 350's( big blocks) I'd like to use them on my Chrysler 360's( 5.9liter small blocks) and was wondering what the difference between the metering rods and or jets might be. I'd like to use them due to the fact my...
  8. W

    360 rear seal revisited-possible cause...I need the experts!!!

    OK recently posted about the rear seal I'm about to replace due to an oil leak. I've noticed a mechanism that seem to be causing the oil leak. seem the rear seal doesn't directly leak when the engine is running or if it is its very little. I noticed after changing the engine diapers that they...
  9. W

    plug and wires recommendation for 360-

    Anyone got a recommendation on plugs and wires? RN14YC? cheap ($25) or "race" ($45) wires? Greg-
  10. W

    360 rear seal experts wanted!!!!

    Sirs: After much research and debate and finally the cost factor. I was planning on re powering with indmar 5.7's, My mechanic and several other "chrysler guys"- talked me into replacing the rear seal in place of the re-power. My situation is a 28 rampage express with twin counter...
  11. W

    drive belt part number wanted.

    Hello all: Having issue with the drive belts on my circa 1989 360's. Want to stick with the gated family of belts they seem to be very robust. Not sure if I need the 7425, 7430 or the 7435. Anyone using a well fitting belt with a valid part number i can cross reference please advise. Thanks...
  12. W

    standard rotation 360 leaking oil!!!

    Hello! I have a standard rotation 360 circa 1989,leaking oil. in a twin installation 1989 rampage. opposite rotation runs great and doesn't leak a drop. standard rotation is leaking from the Pan/oil filter/rear seal area, due to its location i cant find the exact location I was thinking to do...
Back
Top