rod Casting #

[48tony]

Can someone out there help me find the part # for the rods i have.The casting # on the rods are 327213 they are for a 3 cylinder inline johnson between 60 & 70 hp.Not to sure of the year but the guy said about 1974?Allso on the flip side the numbers are 59 .then a other set of cast # are AA3.These rods are a bit different from my 1970 60 hp rod part nuber on them are omc 387465. need to find out if i can use the ones i am looking for part #.all the holes mike the same the length is the same.The rod i am in qustion about flares out at the bottom. the ones that came off do not flare out. can someone out there help me out on this mystry rod.

 

[haffiman37]

If all measurements are the same , one last test:
Weight!!!
Both 70 and 74 rods gets superseeded to part number 0387465, available on this site.

 

[collector_inspector]

Good question

B

 

[racerone]

I believe the same casting # ( 327213 ) is used on the 2 cylinder 25 / 30 /35 Hp motors

 

[48tony]

racer one, how is that the case.I got 3 rods making the motor a 3 cylinder that these rods came from.Or are you saying they used them on the 2 and 3 cylinders.I am still at a loss with all this feedback

 

[racerone]

Yip, they used the same parts on those 2 cylinder motors.