Logo
FULL SITE MENU

Recent content by 56bigsky

  1. 5

    tilt/trim problems

    thanks for the reply, found the problem it was inside the PDP itself, solder had blown out from around one of the pins on the up relay and not making contact, re-soldered it and back to working.
  2. 5

    tilt/trim problems

    I meant blue wire shows 0 voltage when the tt pig tail wires are plugged in. Also I can connect direct 12v to the tt motor and it will run up and down like it should
  3. 5

    tilt/trim problems

    got the motor and still not working. What I did discover was that the blue and green wires coming from the PDP over to the plug in for the tt motor pig tail shows 11.75 volts on the blue and 12+ volts to the green wire, but when I plug in the tt wires to the connector and test voltage the green...
  4. 5

    tilt/trim problems

    Good morning, I have a 03 Evinrude 225 E225FLPSTM, the tilt/trim quit me out of the blue, I've got power to and from the helm and motor up/down switches and power coming out of the PDP unit to the trim motor but nothing happening. I have put direct 12v power to up and down wires going to the...
See more
Back
Top