Logo

Recent content by 72degreeangler

  1. 7

    1990 Johnson 60 hp TJ60TLESM crank no start

    I threw a bunch of new parts at my ignition. Now I know at least those aren’t going to be letting me down. It ended up being the coils switched around and power pack and fly wheel key. It was a few good sparks then weak sparks tho.
  2. 7

    76' Evinrude 15hp running issues/?'s

    But it was……… it sounds like
  3. 7

    76' Evinrude 15hp running issues/?'s

    What did the spark plugs look like when you got it back from the river run?
  4. 7

    Help!! 78 35hp johnson 35853R

    I have a 77’ 25 hp that I changed the water pump on. It works good. Are you sure there is enough water in your test barrel?
  5. 7

    Help!! 78 35hp johnson 35853R

    I said exhaust tube but it’s the tube to keep the exhaust away from the shaft. I took my motor off the boat put it on its front or the transom mount whatever you want to call it and put the copper tube on the engine side then slid the lower on till I could only get a couple screw drivers in...
  6. 7

    Help!! 78 35hp johnson 35853R

    Did you make sure the copper pipe was in the rubber grommet up top? And is the rubber grommet in good condition? I’m changing mine right now and can’t get the exhaust tube to fit in. So it won’t slide together all the way.
  7. 7

    1978 Johnson 25e78c - rough and irregular spark

    Mine keeps running sometimes too. Not sure if it’s a ground issue or what it is. You probably know how it works but when you turn off the key it is supposed to ground the power pack and kill it. A new key switch fixed it for a while but it’s doing it again.
  8. 7

    1995 60hp Evinrude E60TLEOC no spark

    With your tester can you get a good ground and see how many ohms you have on the power pack side of the kill switch?
  9. 7

    1995 60hp Evinrude E60TLEOC no spark

    Have you pulled out your spark plugs and grounded them good and checked for spark or got a ignition tester?
Back
Top