Logo
FULL SITE MENU
F

f11rth

New member
Joined
Last seen
Messages
14
Reaction score
0

Latest activity Postings About

    • F
      f11rth replied to the thread 2015 6.2.
      Thanks
    • F
      f11rth replied to the thread 2015 6.2.
      Can anyone explain to me the purpose of the poppet valve.
    • F
      f11rth replied to the thread 2015 6.2.
      So took readings off of both motors with thermal gun and the port riser on both motors are truly running in the 200 range where the...
    • F
      f11rth replied to the thread 2015 6.2.
      Are you talking about the freeze out plug ?
    • F
      f11rth replied to the thread 2015 6.2.
      Ok. I will try that next week. Thanks
    • F
      f11rth replied to the thread 2015 6.2.
      Took both port exhaust risers off today and checked to see if I could find any blockage in them and didn’t find anything that jumped...
    • F
      f11rth replied to the thread 2015 6.2.
      Thank you I will check it out tomorrow and let you know.
    • F
      f11rth replied to the thread 2015 6.2.
      Not sure what piece mill means. I have mechanical back ground on cars but not boats. I have two motors in the boat and both motors on...
    • F
      f11rth replied to the thread 2015 6.2.
      Yes I am changing the ones on the risers. I also took the 26- 23 out and checked them on all exhaust risers and really didn’t see...
    • F
      f11rth replied to the thread 2015 6.2.
      Port exhaust is showing 214 degrees and the starboard exhaust is around 150 degrees when it goes into guardian mode.
    • F
      f11rth replied to the thread 2015 6.2.
      They are closed cooling for the block and the exhaust has both antifreeze and fresh water running through them.
    • F
      f11rth replied to the thread 2015 6.2.
      Yes both motors are having the same problem. The port exhaust on each motor will over heat after running at 3000 rpm or higher for a...
    • F
      f11rth replied to the thread 2015 6.2.
      2a435699 I have not done that with thermal but I have switched sensors from side to side. I have a scanner and the temp stays the same...
    • F
      f11rth posted the thread 2015 6.2 in Mercruiser Sterndrive Forum.
      Exhaust temp on both motors on the port bank on both of them is over heating. Took apart check valve and found no issues. Also changed...
    Show older items
  • Loading…
  • Loading…
Back
Top