Just came across this thread. Similar issue with my 88 DT85. Lower crank seal was bad and was compromising the sealed chamber the powerhead needs to be in order to mix/burn/exhale fuel and oil. Ran fine on the muffs in the driveway. Never got it off the trailer at the launch. Started fine but once in gear, it snuffled and died every time.
This seal is located on the underside of the powerhead where it mates to the driveshaft. Your ob will never run right if this seal is bad and you risk burning pistons/scoring cylinders if you force it up to higher r's for the sake of keeping it running.