Logo
FULL SITE MENU

Search results

  1. J

    BF115A no voltage to fuel pump

    Mine stays on. I think it might be a built in safety feature to not allow the engine to run if it thinks there is no oil.
  2. J

    BF115A no voltage to fuel pump

    I didn't get the link.
  3. J

    BF115A no voltage to fuel pump

    Thanks for both answers. I would love for you to send me a pdf. I'm back home and not near the boat, but I will be in a couple weeks.
  4. J

    BF115A no voltage to fuel pump

    I'm working on my dads BF115A. It cranks but won't start. There is no voltage getting to the high pressure pump. I checked all the fuses and put a new main relay in. When the key is in the run position the red no oil light stays on. It has oil. Is it possible the ecm won't send voltage to...
  5. J

    BF115a No start voltage issues.

    I haven't found a wiring diagram yet. I now have 12volts coming out of the blue/yellow striped wire on the main relay. I don't have any voltage going to the blue/yellow striped wire on the fuel pump. I tested it for continuity but got no resistance.
  6. J

    BF115a No start voltage issues.

    I am working on my dads motor. It died on him on the lake and had to get it towed in. I have fuel to the high pressure pump. It is not pumping. I am only getting 7.9 volts from the battery switch to the starter. Also, all three fuses are at 7.9. I have a strong 12.8 from the battery to the...
  7. J

    2000 BF115A Gear Shifter Rod

    I have to be missing something. Do I have to remove the cover?
  8. J

    2000 BF115A Gear Shifter Rod

  9. J

    2000 BF115A Gear Shifter Rod

    I can't get pliers on it or a hammer in that small area.
  10. J

    2000 BF115A Gear Shifter Rod

  11. J

    2000 BF115A Gear Shifter Rod

    Bob, Are you saying put a pair of pliers on the bottom of the shift shaft and hit down with a hammer and it will come out?
  12. J

    2000 BF115A Gear Shifter Rod

    The server won't let me post any pictures because they are too large for the server to process.
  13. J

    2000 BF115A Gear Shifter Rod

    I am at my dad's working on the boat. I'm not having success getting the gear shifter off. I think it is jammed way up in there.
  14. J

    2000 BF115A Gear Shifter Rod

    Thanks a bunch for the help. He is a few hours away. I'll be back there for the 4th of July. It look like I will order #12, #13 and maybe 32.
  15. J

    2000 BF115A Gear Shifter Rod

    I thought about filing it, but over 30% of the id of the receiver are flat. It depends on how hard it is to replace the receiver. If it is a huge job, I would prefer to replace it.
  16. J

    2000 BF115A Gear Shifter Rod

    I believe that is it.
  17. J

    2000 BF115A Gear Shifter Rod

    A boat repair guy came out and installed a water pump impeller on my dads boat. Now it won't go into reverse or forward. I took off the lower unit and discovered the female end of the shift rod lever (I think that is what it is callled) was all boogered up. I think it was forced back on. It...
  18. J

    Helping My Dad on BF115A

    This was an easy job and got it running again.
  19. J

    Helping My Dad on BF115A

    I bit the bullet and bought the upgrade kit. Boatsnet wanted close to $1,000. I got it from hondaofsouthgeorgia for $699. This looks like a straight forward job. If anyone has done it and has some pointers, I would appreciate learning them.
  20. J

    Helping My Dad on BF115A

    I found the pump https://www.hondapowersportsparts.com/oemparts/p/honda_marine/16735-zw5-024/pump-unit-fuel It's still $600. I like jgmo's idea. Does anyone know if the original pump is PWM? Has anyone installed a Carter pump?
Back
Top