Logo
FULL SITE MENU

Search results

  1. B

    Bellows Installation

    You Are Entilted to Your Opinion!
  2. B

    Bellows Installation

    Welcome Advise😉 Other experience shows without doubt that Other yet to be explained " solutions" exist... And work as good as or better than " factory" Manuals prescribe. Procedures, as well as Products, outdate "Old School" procedures, and Products. It's how Evolution Works😁
  3. B

    Bellows Installation

    I find the 1/4" easier, and less likely to rub when trimmed up or Raised. Never used the glue. No need, never saw an issue. No leakage.
  4. B

    Bellows Installation

    kghost, has the best answers. As to the speedohose, be sure to clip it to the intake H20 hose to keep from pinching. Use the Stainless Steel Bellows Clamps not glue. Positioning the clamp screw is important, don't think tightening with a screwdriver. Use a 1/4" wobble extension with a 1/4"...
  5. B

    2005 225 Tilt/Trim issues

    Remember that you have limit switches for your tilt trim. Those maybe confusing you as to the partial trim observation. Also, fill the tilt Res. When the unit is fully up, not down.
  6. B

    Replacing risers - 350EFI

    You do need to replace those manifold to riser Hoses, 4 in. I think
  7. B

    Replacing risers - 350EFI

    Engine numbers and drive numbers should be on a tag on the aircleaners plastic cover top. However it's easy to monitor temp of the risers under use. Just feel each one for similar temps.
  8. B

    7.4 Mag Bravo III issue - bogging/backfiring when getting on plane

    About 35 psi on the Guage. That has a high and low pressure pump. Be sure your filters are clean.
  9. B

    marine power 340HP wiring diagram and DLC connector location needed 2008, MEFI

    Power relay issue, dropping out
  10. B

    Dumping

    Check your fluid levels. Anything visible in the bilge?
  11. B

    V Drive Engine Alignment Tips

    Yes, of course the trunnions Must be Free to move easily. Then you won't burnout trying to align the shaft
Back
Top