im restoring, turning a 14 ft. tri-hull fiberglass boat into a bass fishing boat.
it has an envirude 9.9 2 casting seats, one at the back in front of the transom and the other seat near the platform floor with a remote steering. and a front casting floor.
my thought is to add 2 cooler/ livewells in the middle on either side to blance the load.
i will be using a thru the hull pump for fresh water, the one cooler holding my minnows for bait.im using a seperate plastic food container inside the one cooler to seperate the minnows.
my question is do i really need the 2 livewells ?
will the 1 cooler/ livewell be enough ?
thanks,
rick
it has an envirude 9.9 2 casting seats, one at the back in front of the transom and the other seat near the platform floor with a remote steering. and a front casting floor.
my thought is to add 2 cooler/ livewells in the middle on either side to blance the load.
i will be using a thru the hull pump for fresh water, the one cooler holding my minnows for bait.im using a seperate plastic food container inside the one cooler to seperate the minnows.
my question is do i really need the 2 livewells ?
will the 1 cooler/ livewell be enough ?
thanks,
rick
Last edited: