Logo

Motor Out of Storage

srchief_100

New member
"My career has kept me tied do

"My career has kept me tied down for the past 5 years. Now that I'm retired I want to get my boat and motor ready for some fishing. The '92 model 40hp Johnson has not been started in over 5 years. What should I do to the motor before trying to start it up. Thanks in advance.<font color=""000000""><font face=""arial,helvetica""></font></font>}"
 
"Put a bit of 2 stroke oil in

"Put a bit of 2 stroke oil in each cylinder and with the plugs out roll it over by hand a few times just to make sure the rings aren't stuck and to get some lube on the cylinder bores. A new water pump impeller is cheap...it may go short term anyway, replace it now...before summer."
 
inspect gas line and bulb...i

inspect gas line and bulb...i would just replace the whole thing from tank to motor..the small o-rings in the connectors are prob hard as rocks and the bulb is prolly dryrotted..i would run an extra half pint of oil in the 1st 6 gallons of gas ...change lower unit oil...run it at home with lower unit in a barrel or large cooler with a hose running into whatever you use to replace water..i do not like to run a motor for any extended period on muffs..good luck
 
Back
Top