Logo
FULL SITE MENU

Recent content by Kirdud

  1. K

    Volvo Penta 4.3 OSI-E Battery Advice Needed

    Battery Delkor 31-800, 800 CCA, 12V, 105Ah, 190 min (RC). He did not use the boat’s charger, but instead used his own non-smart charger. I’m in Cyprus, and according to the information I found online, this is an acid battery. It does not seem to be the best choice for marine use. AGM batteries...
  2. K

    Volvo Penta 4.3 OSI-E Battery Advice Needed

    The batteries are lead-acid. As I mentioned, my boat has been out of the water and in dry dock, with all cables disconnected from the batteries for the past 6 months. When the mechanic recently tried to reconnect the cables, there was no response at all. He then attempted to charge the batteries...
  3. K

    Volvo Penta 4.3 OSI-E Battery Advice Needed

    I installed them in 2023 and that’s it I haven’t really checked them since then. To be honest, I never had any issues with them until now. The boat is in the water about 360 days a year and is usually connected to shore power at the marina when docked. The batteries are mainly for the engines...
  4. K

    Volvo Penta 4.3 OSI-E Battery Advice Needed

    The batteries are only for the engines one battery for each engine, plus the bow thruster. The generator uses its own battery. The anchor, fridges, etc. use the large battery. What I mean is that if the alternator can charge the battery only up to 95Ah, then there is no sense in installing a...
  5. K

    Volvo Penta 4.3 OSI-E Battery Advice Needed

    Good day, captains! Could you please advise which batteries fit well with the Volvo Penta 4.3 OSI-E engines? I have two of them, and during the 6 months of maintenance/storage, my batteries completely died. I replaced them back in 2023 with Delkor 105Ah batteries. Now I’m starting to think...
  6. K

    Water in Bilge Coming from Transom?

    Hi Joseph! Yes, I found the issue. The problem was a leak in the port side transom. Over the past two years, I had noticed some water entering the bilge after going out and returning, but only now, when the leak became so fast and severe, did I start investigating. Unfortunately, in our type of...
  7. K

    Need Volvo Penta Tools for XDP-B Repair

    Thank you! I will try!
  8. K

    Need Volvo Penta Tools for XDP-B Repair

    Hello Captains, I’m facing an issue finding the necessary tools. On board, I have two Volvo Penta OSI-E 4.3 engines with two XDP-B drives. One of the drives has failed due to a broken gear. To repair the drive, I need specific tools from the Volvo Penta catalogue: PN 3861659 and PN 3861661. I...
  9. K

    Exhaust Manifold + Exhaust Elbow

    Yes, it seems they definitely need to be replaced. It appears that the STBD engine currently has the same issue, and the manifolds and risers need to be replaced as well.
  10. K

    Extract the Engines from Monterey 282 CR

    The engine has been removed. I haven’t been to the boatyard yet, so the only thing I know is that the generator was taken out and a special tool to lift the engine was crafted. I’ll provide more details later once I have all the information. A lot of people are curious about how it was possible...
  11. K

    Exhaust Manifold + Exhaust Elbow

    Good day, captains! Does it make sense to use original Volvo Penta parts for the exhaust manifold and exhaust elbow, or is there a good aftermarket option that would fit? The boat is used in salt water. By the way, based on the photo, do I need to replace them immediately, or can this be done...
  12. K

    Extract the Engines from Monterey 282 CR

    Thank you! I’ve already sent them a message, but I don’t think they’ll be able to help me because it’s a 2005 boat. We’ll see.
  13. K

    Extract the Engines from Monterey 282 CR

    Hello captains! I own a Monterey 282 CR with 2 Volvo Penta 4.3 engines on board. Unfortunately, one of my transom shields is leaking, and to fix that issue, one of the engines needs to be removed. My mechanics are having a problem with this because the space is very tight, and most parts of the...
  14. K

    Water in Bilge Coming from Transom?

    Hello, Captains! I plan to remove the engine to access the transom. Do you have any recommendations for what else we should check and replace, since some parts are easy to reach once the engine is moved?
  15. K

    Water in Bilge Coming from Transom?

    Thank you, but filling the bilge with water could actually be the problem. In my opinion, the leak itself is not at the bottom but somewhere around the middle of the boat, about 20 cm higher. The mechanic also mentioned the holes that were sealed with silicone after the transom transducer was...
See more
Back
Top