Logo
R
Reaction score
0

Latest activity Postings About

    • R
      rodm717 replied to the thread New Problems Older Motor.
      1st trip out on the Chesapeake Bay and.motor settled in perfectly. Very crisp and responsive and idle did settle out., compared to...
    • R
      rodm717 replied to the thread New Problems Older Motor.
      All back together and fired right up! Sounds a little fast and will have to adjust idle, ect, but very happy.
    • R
      rodm717 replied to the thread New Problems Older Motor.
      Okay, I see now there was nothing on any of the gaskets surfaces when I pulled apart. Unfortunately I have not found a smoking gun...
    • R
      rodm717 replied to the thread New Problems Older Motor.
      Yes gasket sealant is not for use during carb reassembly. Carb to manifold. Gasket dressing, not to be confused with gasket maker or rtv.
    • R
      rodm717 replied to the thread New Problems Older Motor.
      Tee was clear and ended up running to my local BRP/Evinrude/Johnson parts dealer about an hour away. It did cost more than online, but I...
    • R
      rodm717 replied to the thread New Problems Older Motor.
      Droid thanks for response. I am further into it now. Motor starts on starter fluid. I have fuel in front of and behind fuel pump to...
    • R
      rodm717 replied to the thread New Problems Older Motor.
      Also, running fine to nothing, I'm finding it hard to think it is the carburators, but not counting that out. Pulling the line to the...
    • R
      rodm717 replied to the thread New Problems Older Motor.
      Okay, I have spark on all 4 cylinders and compression is 125psi across all 4 cylinders. So far so good. But when I pulled the plugs , I...
    • R
      I have a '76 Evinrude 85hp v4 that I've been very happy with. New coils, wires, plugs, and fuel pump, working great for two years. Last...
  • Loading…
  • Loading…
Back
Top