Logo
FULL SITE MENU
S

sqrlnut

New member
Joined
Last seen
Messages
18
Reaction score
0

Latest activity Postings About

    • S
      sqrlnut replied to the thread 1991 Luhrs 3400 Crusader 454.
      i did/do test the systems before replacing. the bilge switch was bad (on 2 bilges of the 3) and 1 bilge i replaced bc the pump cover...
    • S
      sqrlnut replied to the thread 1991 Luhrs 3400 Crusader 454.
      so i got the boat from Oceanport to Long beach the other day on its first trip in 7 years. motors were steaming a little but maintained...
    • S
      sqrlnut replied to the thread Gauge HELP.
      there is power to the switch (they are on the same one) im thinking if there in series it could be the wire to the 1 anchor bulb not...
    • S
      sqrlnut replied to the thread Gauge HELP.
      on the nav lights, its not the switch, the anchor light comes on (but only one of them do) and its no not getting power to the others...
    • S
      sqrlnut replied to the thread Gauge HELP.
      so i installed all the gauges: the P side Tac and water move slightly when turned on but will not produce a reading. the S side all work...
    • S
      sqrlnut replied to the thread Gauge HELP.
      so i got all the gauges installed, the P side water temp and tac moves when i turn on power but neither one read. the S side tac...
    • S
      sqrlnut replied to the thread Gauge HELP.
      So the Tac sais to hook on of the wires to the negative of the coil? What wire would that be?
    • S
      sqrlnut replied to the thread Crusader 454 tune up.
      got the fuel lines and carb done, started doing the gauges, the next issue is the boat needs to be out of the marina by the 29th so i'm...
    • S
      sqrlnut replied to the thread Gauge HELP.
      whats the 12von the volt gauge for? Whats the O on the HG 129 for? i need to know if different letters mean the same thing on different...
    • S
      sqrlnut replied to the thread Gauge HELP.
      Oh, the oil gauge hg 109 s,g,12v, and the bulb with 2 wires.
    • S
      sqrlnut posted the thread Gauge HELP in Crusader Marine Engine Forum.
      Guys, I know I saw this somewhere but u can't find it and I'm pressed for time. The owner bought gauges for the boat: the volt gauge...
    • S
      sqrlnut replied to the thread Crusader 454 tune up.
    • S
      sqrlnut posted the thread Crusader 454 tune up in Crusader Marine Engine Forum.
      Hello all, I am the new owner of a 90 Luhrs with crusader 454s and am looking to do a full tune up. i need to replace 1 fuel line (but...
    • S
      sqrlnut replied to the thread 1991 Luhrs 3400 Crusader 454.
      missnancy Is correct, i went to the boat today bc his friend got the starter and wanted help installing it. i went up top and sure...
    • S
      sqrlnut replied to the thread 1991 Luhrs 3400 Crusader 454.
      His issue with the sea trial is that the boat sat for years so all fluids and tune-up need done along with needing the gauges replaced...
    Show older items
  • Loading…
  • Loading…
Back
Top