Logo
FULL SITE MENU

Search results

  1. S

    1986 Crusader 454 electronic ignition conversion problem

    is there a preference on brands or kits that are recommended. i was looking at the A-Team Performance Marine HEI Electronic Distributor 65K Coil Compatible with 350 454 V8 Mercruiser OMC 5.0 5.7 7.4, since its only 200. bucks just confusing when one is 200 and another is 600. and the...
  2. S

    1986 Crusader 454 electronic ignition conversion problem

    sorry, i planned on swapping the whole distributor since i believe it is still the original with original wires as well
  3. S

    1986 Crusader 454 electronic ignition conversion problem

    Guys, i'm new here and would like to swap out my old distributors on my 1990 crusader 454s. i saw a few EIs around 200.00. what all would be involved with a swap out. thanks
  4. S

    1991 Luhrs 3400 Crusader 454

    i did/do test the systems before replacing. the bilge switch was bad (on 2 bilges of the 3) and 1 bilge i replaced bc the pump cover was so broke from sucking up stuff through the strainer and Rule dont sell the pump cover. i relaced that one with an auto flat 1500.
  5. S

    1991 Luhrs 3400 Crusader 454

    so i got the boat from Oceanport to Long beach the other day on its first trip in 7 years. motors were steaming a little but maintained temp fine, UNTIL,,,, one stopped running due to overheating, (the alarm didnt sound) thing with all the swells we had one of the corroded connectors dislodged...
  6. S

    Gauge HELP

    there is power to the switch (they are on the same one) im thinking if there in series it could be the wire to the 1 anchor bulb not getting power. not sure they would wire it that way though
  7. S

    Gauge HELP

    on the nav lights, its not the switch, the anchor light comes on (but only one of them do) and its no not getting power to the others not that i learned what an optical tac is LOL, i might just have to get one, would a cheap one suffice for how much i would use it?
  8. S

    Gauge HELP

    so i installed all the gauges: the P side Tac and water move slightly when turned on but will not produce a reading. the S side all work but the Tac bounces a 200-300 rpm i just found out my nav lights aren't getting power as well. does anyone have a Luhrs wiring diagram that will work for my...
  9. S

    Gauge HELP

    so i got all the gauges installed, the P side water temp and tac moves when i turn on power but neither one read. the S side tac bounces when the baot is running. I assume its a ground issue... i also have an issue with my nav lights not working. does anyone have a Luhrs wiring diagram that...
  10. S

    Gauge HELP

    So the Tac sais to hook on of the wires to the negative of the coil? What wire would that be?
  11. S

    Crusader 454 tune up

    got the fuel lines and carb done, started doing the gauges, the next issue is the boat needs to be out of the marina by the 29th so i'm kinda rushing its sea worthiness LOL. I'm looking for someone to bring it from Oceanport to LBI the Captain i had cant do it now. i digressed,,,, so i want to...
  12. S

    Gauge HELP

    whats the 12von the volt gauge for? Whats the O on the HG 129 for? i need to know if different letters mean the same thing on different gauges. i think: S- signal (but what does that mean?) G- ground I- ignition O-? whats it for/ why? 12v- whats it for/ why?
  13. S

    Gauge HELP

    Oh, the oil gauge hg 109 s,g,12v, and the bulb with 2 wires.
  14. S

    Gauge HELP

    Guys, I know I saw this somewhere but u can't find it and I'm pressed for time. The owner bought gauges for the boat: the volt gauge hg110 has s, g, I, 12v on it AND the bulb with 2 wires? the old gauge just has s,g,I. The Record hg129 has o,s,g,i and the old one has s,g,i The tac is a...
  15. S

    Crusader 454 tune up

  16. S

    Crusader 454 tune up

    Hello all, I am the new owner of a 90 Luhrs with crusader 454s and am looking to do a full tune up. i need to replace 1 fuel line (but will do both) to the carburetor i plan on replacing with flex line. I'm not sure what ends it needs, what length to get or specific brand recommendations i D/L...
  17. S

    1991 Luhrs 3400 Crusader 454

    missnancy Is correct, i went to the boat today bc his friend got the starter and wanted help installing it. i went up top and sure enough the starboard engine shifter was in gear. pot in neutral and it cranked right over. on another note, does anyone know where i can locate an in-depth...
  18. S

    1991 Luhrs 3400 Crusader 454

    His issue with the sea trial is that the boat sat for years so all fluids and tune-up need done along with needing the gauges replaced (some stick) and their all weathered and fogged. He bought new ones to replace them but didnt have time before the move.
  19. S

    1991 Luhrs 3400 Crusader 454

    He ordered the fuel line and started. Hopefully it's here for next week and we can get it fixed. He's worried about me taking it for a sea trial...should that be a red flag? I know the guy is meticulous about the boat and the engines, he won't be there to Take it out since he's in FL. He did...
  20. S

    1991 Luhrs 3400 Crusader 454

    thanks, good info. i have nothing for the boat as far as manuals (i'd like to get one, Just need to be sure i get the right one) and where to get one. i'm going to try to get to the boat Thursday and Friday (im in PA its in NJ) id love for it to be the shifter, and thats a good possibility...
Back
Top