Logo
FULL SITE MENU

Recent content by Wasque

  1. W

    sticky/binding throttle lever

    Yes - had to disconnect the cables for a project, then when I reconnected them, the shift cable was sluggish. Boat is on the trailer
  2. W

    sticky/binding throttle lever

    I ended up spinning the prop a little bit and the shift rod moved...I think that was the issue - its now moving much better.
  3. W

    sticky/binding throttle lever

    I did test the throttle only and it moves fine…must be something with the gear cable.
  4. W

    sticky/binding throttle lever

    Hello all, I have a 2004 BF 225 and after doing some rewiring work in my console that required the cables to be disconnected, I reconnected them to my top mount binnacle. Now the throttle now feels very sticky, and almost like its binding up. I know the trim cable is wrapped around the...
  5. W

    Orange tube on 2004 225

    Anybody know where this orange tube should actually start and end?!
  6. W

    Relocating flush hose - 2004 BF 225

    Has anybody ever relocated their flush hose to a location inside the boat to make flushing much easier? Accessing my flush system from the boat, while on the dock during the season is a pain. I'm thinking of getting some additional hose and a coupler, and moving the female end to a spot under...
  7. W

    converting 25" to 30" shaft OR available LU??

    I'm considering building up the transom on my 22' whaler, and would need to increase the length of the shaft from 25" to 30". Anybody done this before and if so, what parts are needed; new driveshaft, and midsection? Might anybody happen to have a 30" lower unit?! I'm in CT! Thanks
  8. W

    2004 BF 225 Check engine light on but no alarm

    Hey guys, so first off thanks for all the help with the issues I was having. The new ignition works and no check engine light! I have the old harness and have no clue where the issue is...oh well. Second, I patched the hole using JB Weld Kwik Set. This allowed me to slowly build inward from the...
  9. W

    2004 BF 225 Check engine light on but no alarm

  10. W

    2004 BF 225 leak under starboard thermostat

    Hey everybody, need some help here. After repairing a broken screw on the starboard side thermostat, we (a mechanic and I) started the engine to test things out. Well, water was leaking from the space between the block and the plate that the thermostat and timing belt pulleys are all mounted...
  11. W

    2004 BF 225 Check engine light on but no alarm

    First time poster, but I’ve been reading tons of posts going back years primarily covering thermostat issues and related cooling questions such as what’s the best product to use when flushing these engines - vinegar, salt away, salt off, salt terminator (Honda recommended) or others. Today’s...
See more
Back
Top