Logo
FULL SITE MENU

Search results

  1. T

    KG-7 piston rings

    OK, this is probably a long shot, but does anyone have an idea where I might find any rings for a Super 10, KG-7? I picked up this engine and it was locked up. Let the powerhead soak in diesel/kroil/atf for several days. Finally got the cylinder half off the of the crankcase half. Rings were...
  2. T

    setting coil to flywheel gap

    I know there is a tool/ring used to set the gap, and I have read "the Joe Reeves" method, which I could do. However, being a recently retired toolmaker, and with a lathe, mill, etc at my home shop I would like to machine a ring to use. Does anyone have one of those rings? I'd like a measurement...
  3. T

    parts needed for CD-11 5.5 hp

    Can anyone suggest a source for the gear case seal kit? It's Sierra part number 18-2679, best I can tell, but this site shows it as being obsolete. Any idea where I might find one? I hope I don't wear you guys out asking questions. I'm new to this old old outboard stuff, and within the last 2...
  4. T

    1954 CD-11 5.5hp help

    A friend gave me this old engine recently, and it'll be my winter project. Someone in the past has worked on it and reassembled it incorrectly. There are 4 springs that damped the vibration between the transom mount and the rest of the engine. There are 2 different springs, as noted in the parts...
  5. T

    50hp vro2 bypassed and need fuel pump info

    Hey guys, I'm at Ky Lake trying to catch some crappie. First time out with this boat, which has a 1989 50 Johnson. The vro2 was bypassed prior to me acquiring the boat. Engine ran fine in a barrel of water, but not so well now. It will starve for fuel if I try to run much above idle, but will...
  6. T

    50hp water pump question

    I bought a pump kit, which has a few O'rings that my present pump doesn't appear to use. The kit I bought is OEM Johnson/Evinrude. The Orings in question are 2 that are approx an inch or so in diameter. I day approx because I am not at my garage to measure them. There is also 1 that is maybe 1...
  7. T

    Johnson Tracker 50hp trim tilt unit

    Hey guys and gals, I recently bought a 1989 Bass Tracker with a Johnson Tracker 50hp engine. The trim/tilt unit has a small leak at the rod gland seal that I will have to fix, but I cannot find info on this particular unit. All the info I have found shows a unit that has a fill port/plug just...
Back
Top