Logo
FULL SITE MENU

Search results

  1. E

    Early 2000s bf90 carb head scratcher

    A tip. PROBLEM SOLVED! It was to hight friction between "inner" and "outer" trottle valve arm. I had no control where #1 carburetor trottle valv was positioned. A little oil and exercise solved the problem...
  2. E

    Honda BF45 fuel pump leaking engine oil

    Nice to have feedback. Wish you good luck. 💦 BF50 owner
  3. E

    Back to Square 1 with BF20

    Nice with feedback!
  4. E

    2003 BF50A3 Wiring not making sense

  5. E

    BF40A - Lower End Nut torque spec?

    70 Nm = 50.6 ft-lb. Honda tool 07LPA-ZV30100 🚤
  6. E

    Remove Honda bf40 prop shaft holder?

    In Sweden we repair the gear hose. Price ~600$, exl. shipping!
  7. E

    Remove Honda bf40 prop shaft holder?

    I uses this tool to my Honda BF50. Maybe the same as your proposal. https://marinetech.com/retaining-ring-wrench-small-54.html
  8. E

    Remove Honda bf40 prop shaft holder?

    I use this tool. https://marinetech.com/retaining-ring-wrench-small-54.html
  9. E

    Carb sync BF 50

    (y)
  10. E

    Honda BF50 new noise under High RPM/LOAD

    Next step?
  11. E

    Honda BF50 new noise under High RPM/LOAD

    Really interesting!
  12. E

    Carb sync BF 50

  13. E

    Honda 50 no water flow

  14. E

    Honda BF40A outboard hard to start and only 1 piston is firing.

    Great posts. (y)
  15. E

    Honda BF50S 1998 bolts

    Thanks for your advices. Now I have removed the critical bolts, none snapped, and reinstalled them with Loctite LB 8009. Hope they comes off easily next time I need to unscrew them.
  16. E

    Honda BF50S 1998 bolts

    I am wondering if the bolts in my Honda is of bad quality? I often hear of bolts that has broken. 1. Should I replace orginal bolts, preventively, at thermostat, inlet manifold and waterjacket with stainless types? 2. Could there be a problem with corrosion between the stainless bolt and...
  17. E

    Can not synchronize Honda BF50 - 98 carburetor

    PROBLEM SOLVED! It was to hight friction between "inner" and "outer" trottle valve arm. I had no control where #1 carburetor trottle valv was positioned. A little oil and exercise solved the problem with "dead carburetor! Thank you for your advices. It gave me new ways of thinking. Erik
  18. E

    Can not synchronize Honda BF50 - 98 carburetor

    I bought an Syncro Motion Pro synchronizer, so far so good. But after done every possible check of the motor, comp, spark, valves, cleaning and new gaskets in carburetors the top carburetor stops with double vaccum compared to the other two carburetors. An other difference is that whem I...
  19. E

    Honda BF35A - BF50A flange marking

    Thank you for the answer/tip. Now I can go shopping BF50 carburetors to my BF50 who I bought with BF35 carburetors. :(
  20. E

    Honda BF35A - BF50A flange marking

    Is there a system on Honda BF35A to Honda BF50A flange markings on the caburetors? It seems to a system as below? BF35A - ex. 12AA HA09 or 12AA FFT or 12AB RH05 BF45A - ex. 31AA ND16 BF50A - ex. 31BC OF15 or 31CB UF27 or 31AA DJ06 Please explan so I can identifie a carburetor then I bye one...
Back
Top