90 hp johnson fuel location?

[Kahuna1968]

i have a 1996 johnson 2 stroke, just put it on and trying to locate the fuel intake connection

 

[racerone]

Look the motor over carefully.-----Hose might go direct to the fuel pump.----Also determine if oil injection is in service.---------DEtermine whether oil injection is tested ready to go or if it needs to be prepped / commissioned.

 

[Kahuna1968]

Look the motor over carefully.-----Hose might go direct to the fuel pump.----Also determine if oil injection is in service.---------DEtermine whether oil injection is tested ready to go or if it needs to be prepped / commissioned.

pretty sure this is the VRO? i did not intend to use it. however see the hole on the engine, is that where there should be and adapter for the fuel hose to connect?

 

[racerone]

picture #3 is where fuel / oil connect.

 

[Kahuna1968]

picture #3 is where fuel / oil connect.

i cannot seem to find a connector for the hose that would fit that.

 

[Kahuna1968]

i cannot seem to find a connector for the hose that would fit that.

any suggestions

 

[dgreel12]

Looks to me that someone decided not to use the VRO system, they have a high failure rate. I eliminated it on my motor and now just do premix. So a regular fuel pump may have been installed.

 

[Kahuna1968]

Looks to me that someone decided not to use the VRO system, they have a high failure rate. I eliminated it on my motor and now just do premix. So a regular fuel pump may have been installed.

racerone say pic three is the fuel/oil line connector on the engine side. trying to find a connector for the hose that matches?

 

[racerone]

????----The hoses slide on to that amber plastic manifold.

 

[Kahuna1968]

????----The hoses slide on to that amber plastic manifold.

so you are saying that i can just use the hose with a clamp and slide onto the amber plastic manifold? not to us any quick connect type connector? this is for my fuel line.