Logo
FULL SITE MENU

Search results

  1. A

    9.9 carb diagram

    Anyone have a link to a carb diagram for a 2015 9.9? Put in the details on the yamaha site but says its not recognised.
  2. A

    2003 MPI 5.0 oil pressure sender

    Ok folks, had a dodgy oil pressure gauge. I went out to the boat to see what his problem was. Turned it just a dodgy connection on the sender but there was another sender on the block forward of the oil pressure sender and so close that the gauge sender plug although loose couldn't come off and...
  3. A

    Centaflex M160 spares

    Bit of a long shot, anyone have or know where I could get spare parts for a centaflex M160. I'm missing the fail-safe bits from one. Btw, I'm UK based
  4. A

    Alarm buzzer wiring

    Anyone here got a wiring diagram for a 2003 5.0 MPI . It's fitted in a 2000 searay 240 so they might have messed with the colours when it gets to the helm with their horrible fuse box nonsense. Anyway, there is no warning buzzer under the helm that I can find. Would like to know the wiring...
  5. A

    5.0 MPI exhaust manifold and riser temp

    What sort of temp should the exhaust manifold and riser run at? Does the riser or manifold get fed first?
  6. A

    5.0 MPI manifold t-drain failure

    Fitted new manifold/risers and new t-drain manifolds. First trip out and the starboard bowl on the t-drain blew off and flooded the bilge. What could cause this? Faulty part? Popped it back on and made it to the mooring at slow speed. Is this part of the single drain system? Can it be easily...
  7. A

    BF5 Throttle/gear linkage help

    Hi, just took the powerhead off to replace a corroded manifold, all gone ok until I tried to replace the throttle/gear column part with the spring on top. I've got the workshop manual but it's no help at all. Can anyone with a BF5 take a few close up pics of the spring and column for me to see...
  8. A

    BF5 A advice

    Just picked up a cheap BF5 A and although it starts and runs ok it won't idle very well, guessing its a dirty carb but I've also noticed a water leak coming from underneath the condenser, dribbles down when running. Is this likely to be head gasket or is there something else there that could be...
  9. A

    9.9 oil leak

    Hi, hoping someone can help and maybe stop me wasting money. Just fired up my old 1980 9.9 which has been in the store for 5 yrs. Hoping to stick it on a little 4m inflatable for costal diving. Started first time , although a little smokey and fast revving at idle but that was due to stuck carb...
Back
Top