Logo
FULL SITE MENU

Search results

  1. M

    1960 Evinrude 40HP Wiring

    I hope someone can help me. I picked up a 1960 Lark 40HP and it came with a wiring harness and what used to be a switch. I purchased a new switch (the old was destroyed) and started to wire it. At first when I turned the key to the right it immediately tried to start so I moved one of the cables...
  2. M

    1956 Johnson 30HP Gear Box - Can't remove bushing.

    The bushing and washer are stuck (see picture). I assume it should come off (according to parts diagram) any suggestions on removing it? Thanks, Glen
  3. M

    1962 Evinrude Lark IV Outboard - Keep or Give Away

    Everyone, I purchased this old 40HP outboard for no real reason except it was there and I thought it might be fun to get running and possibly use on my 1958 boat. I actually purchased a 1956 30HP Johnson that I like much more. My question is if this engine is worth working on or should I hand...
  4. M

    Johnson RDE-18 Carburetor

    I purchased a Johnson RDE-18 30HP outboard that was sitting in a barn. After cleaning out most of the mouse droppings in the carburetor I disassembled and found that there is not spring attached to the needle and no place to attach one if I wanted to. Was that the norm back in '56? Is this a...
  5. M

    1956 Evinrude 30HP sputters but won't run.

    I need some help. I have a 56 Evinrude outboard that just won't idle and run. I have good spark, have cleaned the carburator, set the timing using a timing tool, rebuilt the tank, and have new non-ethanol gas at 24 to 1 ratio. I know the tank & gas is good because I tested it on another motor...
  6. M

    1956 Evinrude 30HP Wiring

    I need some help. I have a 30HP Evinrude with no spark. I actually have 2 of these motors one doesn't have a mercury switch and it seems to work. The other doesn't have any spark. I assume it is probably just my wiring. These motors are not on a boat and I'm using a remote trigger starter on the...
  7. M

    1956 Evinrude 30HP Lark Wiring

    I purchased this motor recently to use on my 58 Rich Line Boat. I have 2 wires coming out of the magneto / points that are not attached to anything. I did some quick research and it looks like maybe these went to a kill switch. Question is do I need them connected to start the engine. I want to...
Back
Top